Dry Fire Mag (GLOCK 17/19) Training Kit

Compatibility

This training system is compatible with the following handguns:

• Glock 19 (Generations 3-5)
• Glock 17 (Generations 3-5)
• PSA Dagger

⚠ WARNING ⚠

BEFORE INSTALLING OR USING THE TRAINING SYSTEM:

• Ensure your firearm is completely unloaded.
• Remove all live ammunition from the area.
• Check both the magazine and the chamber to confirm they are empty.
• Follow all firearm safety protocols at all times.

💡 We are not responsible for misuse. Always prioritize firearm safety.

STRIKER ASSEMBLY INSTALLATION

• Select the correct striker for your Glock generation (marked on the side).

• Assemble the striker:
  • Slide the striker's sleeve and the striker spring onto the striker.
  • Compress the spring and lock it in place using the striker cups.

INSTALLING THE LASER CARTRIDGE

Follow the laser cartridge manufacturer's guidelines. Below is a general installation method:

1. Prepare the firearm:
   • Pull back the slide.
   • Pull the takedown toggle down.
   • Pull the trigger.
   • Remove the slide.
2. Remove internal components:
   • Take out the recoil spring.
   • Tilt the barrel out.
3. Insert the laser cartridge:
   • Firmly place the iDryfire Short Flash Laser Boresight cartridge into the barrel.

INSTALLING THE TRAINING STRIKER

1. Remove the stock striker assembly:
   • Depress the striker sleeve using a small flathead screwdriver or punch.
   • While holding the sleeve down, remove the slide cover plate.
   • Take out the stock striker assembly.
2. Install the training striker:
   • Insert the training striker into place.
   • Reinstall the slide cover plate while holding down the striker sleeve and extractor spring plunger.
3. Test the laser:
   • Pull back and release the training striker.
   • If the laser does not activate, push the cartridge further into the barrel.

INSTALLING THE TRAINING MAGAZINE

1. Ensure proper trigger function:
   • Push the trigger bar forward.
   • Insert the training magazine.
   • Pull the trigger to verify that the training magazine resets the trigger bar properly.
2. Start training:
   • Rack the slide once to begin.
   • After the initial rack, no further racking is required—simply pull the trigger repeatedly for continuous training.

ENJOY YOUR TRAINING

Maximize your practice sessions without the cost of live ammunition. Stay safe and train smart!